IBULLDOZER

SD13

AMANDLA ENTJINI

105kW/1900rpm

Ubunzima BONKE

13,700kg (Eqhelekileyo)

Imodeli yenjini

SC8D143G2B1/SC8DK

Fumana isicatshulwa

SD13

Iimpawu
iiparamitha
iimeko
iingcebiso

Inkqubo yaMandla
Inkqubo yokuqhuba
Indawo yokuqhuba/yokukhwela
Ukuziqhelanisa nokusebenza
Ulondolozo olulula

Inkqubo yaMandla

● Amandla awomeleleyo, ukusebenza kakuhle okuphezulu kunye nokonga amandla, kunye neendleko eziphantsi zokulondolozwa.

● Amandla alinganisiweyo afikelela kwi-105kW, ene-coefficient yogcino lwetorque ephezulu.

● Isihluzo somoya esiphuculweyo kunye nenkqubo yokuthatha kunye neyokukhupha iqinisekisa ukuya kuthi ga kwi-99% yokuchaneka kokucoca ukuze kwandiswe ubomi be-injini ngokufanelekileyo.
Inkqubo yokuqhuba

● Iigophe zesixokelelwano sokuqhuba kunye ne-injini zihambelana ngokugqibeleleyo ukuze kuphunyezwe indawo ebanzi yomgangatho ophezulu kunye nempumelelo ephezulu yothumelo.

● I-self-made drive system ka-Shantui ibonisa ukusebenza okuzinzile kunye nomgangatho othembekileyo kwaye kudala ibonakaliswe yimarike.
Indawo yokuqhuba/yokukhwela

● I-hexahedral cab inikeza indawo yangaphakathi enkulu kakhulu kunye nombono obanzi kwaye i-ROPS / FOPS inokufakwa ngokuxhomekeke kwiimfuno ezithile zokuqinisekisa ukhuseleko oluphezulu kunye nokuthembeka.

● I-electronic control hand and foot accelerators iqinisekisa ukusebenza okuchanekileyo kunye nokukhululeka.

● Isibonisi esikrelekrele kunye netheminali yolawulo kunye ne-A/C kunye nenkqubo yokufudumeza zifakelwe ukubonelela ngamava amaninzi omntu oqhuba / okukhwela kwaye akwenze ukuba uqonde imeko yenkqubo nangaliphi na ixesha, ebonisa ubukrelekrele obuphezulu kunye nokulula.
Ukuziqhelanisa nokusebenza

● Inkqubo ye-chassis yemveliso evuthiweyo ka-Shantui isetyenziswa kwiimeko ezahlukeneyo zokusebenza ezinzima, ezibonisa uzinzo oluphezulu nokuthembeka.

● Imveliso ibonakalisa ubude bomhlaba omde, ukukhutshwa komhlaba okuphezulu, ukuqhuba okuzinzile, kunye nokuhamba kakuhle.

● Iblayidi yogutyulo lwemekobume, i-ripper, kunye ne-universal blade inokufakelwa ngokuxhomekeke kwimeko ethile yokusebenza ukuze kufikeleleke ngamandla okusebenza.Izibane ezikhethiweyo ze-LED ezisebenzayo ziphucula amandla okukhanyisa ngexesha lomsebenzi wasebusuku ukufezekisa ukhuseleko oluphezulu kunye nokuthembeka.
Ulondolozo olulula

● Amalungu olwakhiwo azuze umgangatho obalaseleyo weemveliso ezivuthiweyo zikaShantui;

● Iintambo zombane zithatha imibhobho ekhuselweyo yokukhusela kunye ne-deconcentrators ye-branching, ebonisa umgangatho wokukhusela ophezulu.

● Isihluzo se-fuel element kunye nesihluzo somoya ziyilwe kwicala elinye ukuphumeza ulondolozo lwendawo enye.

Igama lepharamitha	SD13 (uguqulelo oluqhelekileyo)	SD13S (uguqulelo lwemigxobhozo)	I-SD13R (uguqulelo lococeko lokusingqongileyo)	SD13C (Uguqulelo lwamalahle)
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg)	13700	14900	15200	13900
Uxinzelelo oluphantsi (kPa)	53.8	38.4	39.2	54.6
Injini
Imodeli yenjini	SC8D143G2B1 (China-II)/SC8DK (China-III)	SC8D143G2B1 (China-II)/SC8DK (China-III)	SC8D143G2B1 (China-II)/SC8DK (China-III)	SC8D143G2B1 (China-II)/SC8DK (China-III)
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm)	105/1900	105/1900	105/1900	105/1900
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm)	449231852950	449235103000	449235103000	449237002950
Ukuqhuba ukusebenza
Isantya sokuya phambili (km/h)	F1:0-3.2 F2:0-5.9 F3:0-9.8	F1:0-3.2 F2:0-5.9 F3:0-9.8	F1:0-3.2 F2:0-5.9 F3:0-9.8	F1:0-3.2 F2:0-5.9 F3:0-9.8
Ukubuyisela umva isantya (km/h)	R1:0-3.9 R2:0-7.1 R3:0-11.9	R1:0-3.9 R2:0-7.1 R3:0-11.9	R1:0-3.9 R2:0-7.1 R3:0-11.9	R1:0-3.9 R2:0-7.1 R3:0-11.9
Inkqubo yeChassis
Umgama osembindini wengoma (mm)	1880	1880	1880	1880
Ububanzi bezihlangu zomzila (mm)	460	700	700	560
Ubude bomhlaba (mm)	2365	2365	2365	2365
Umthamo wetanki
Itanki yamafutha (L)	300	300	300	300
Isixhobo esisebenzayo
Uhlobo lweblade	Incakuba yokuthambeka ethe tye	Incakuba yokuthambeka ethe tye	Iblade yococeko	Iblade yamalahle
Ubunzulu bokwemba (mm)	590	590	590	590
Uhlobo lweRipper	I-shank emithathu	—-	—-	—-
Ubunzulu bokukrazula (mm)	567	—-	—-	—-

TRIMMING BULLDOZER STR23

STR23

AMANDLA ENTJINI:

With 180kW/2000rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

25540kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ukubuza Kaninzi
BULLDOZER SD24-C3

SD24-C3

AMANDLA ENTJINI:

195KW/1900 rpm China-III compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

24700kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Imodeli yenjini:

WP12G265E304

Ukubuza Kaninzi
BULLDOZER DH17-C3

DH17-C3

AMANDLA ENTJINI:

152kW/1800rpm China-III compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

17730kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Imodeli yenjini:

WP7G207E304

Ukubuza Kaninzi
IBULLDOZER SD22

SD22

AMANDLA ENTJINI:

Nge-175kW/1800rpm, le njini ihambelana nomthetho we-China-III wokukhutshwa. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

23450kg (Eqhelekileyo) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Imodeli yenjini:

WP12/QSNT-C235

Ukubuza Kaninzi
BULLDOZER SD26

SD26

AMANDLA ENTJINI:

206kW/1800rpm I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

23400 kg（Standard） I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Imodeli yenjini:

WP12

Ukubuza Kaninzi
BULLDOZER SD20-C6

SD20-C6

AMANDLA ENTJINI:

With 162kW/1950rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

21,000kg (Including ripper) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Imodeli yenjini:

WP12

Ukubuza Kaninzi