IBULLDOZER YOKUNCINISA

I-STR23

AMANDLA ENTJINI

Nge-180kW/2000rpm, le njini ihambelana nomthetho we-China-III wokukhutshwa.

Ubunzima BONKE

25540kg

Fumana isicatshulwa

I-STR23

Iimpawu
iiparamitha
iimeko
iingcebiso

Inkqubo yaMandla
Inkqubo yokuqhuba
Indawo yokuqhuba/yokukhwela
Ukuziqhelanisa nokusebenza
Ulondolozo olulula

Inkqubo yaMandla

● I-injini ye-QSNT-C235 efakiweyo elawulwa ngombane ihambelana nomgaqo we-China-III wokukhutshwa koomatshini abangekho endleleni, ebonisa amandla anamandla, ukusebenza kakuhle okuphezulu kunye nokonga amandla, kunye neendleko eziphantsi zokugcinwa.

● Amandla alinganisiweyo afikelela kwi-180kW, ene-coefficient yogcino lwetorque ephezulu.

● Isixokelelwano sokungena esitywiniweyo sisetyenziselwa ukolula ubomi be-injini ngokufanelekileyo.
Inkqubo yokuqhuba

● Iigophe zesixokelelwano sokuqhuba kunye ne-injini zihambelana ngokugqibeleleyo ukuze kuphunyezwe indawo ebanzi yomgangatho ophezulu kunye nempumelelo ephezulu yothumelo.

● I-self-made drive system ka-Shantui ibonisa ukusebenza okuzinzile kunye nomgangatho othembekileyo kwaye kudala ibonakaliswe yimarike.
Indawo yokuqhuba/yokukhwela

● I-hexahedral cab inikeza indawo yangaphakathi enkulu kakhulu kunye nombono obanzi kwaye i-ROPS / FOPS inokufakwa ngokuxhomekeke kwiimfuno ezithile zokuqinisekisa ukhuseleko oluphezulu kunye nokuthembeka.

● I-electronic control hand and foot accelerators iqinisekisa ukusebenza okuchanekileyo kunye nokukhululeka.

● Isibonisi esikrelekrele kunye netheminali yolawulo kunye ne-A/C kunye nenkqubo yokufudumeza zifakelwe ukubonelela ngamava amaninzi omntu oqhuba / okukhwela kwaye akwenze ukuba uqonde imeko yenkqubo nangaliphi na ixesha, ebonisa ubukrelekrele obuphezulu kunye nokulula.
Ukuziqhelanisa nokusebenza

● Inkqubo ye-chassis ka-Shantui ezinzileyo nethembekileyo isetyenziswa kwiimeko ezahlukeneyo zokusebenza ezinzima.

● Imveliso ibonakalisa ubude bomhlaba omde, ukukhutshwa komhlaba okuphezulu, ukuqhuba okuzinzile, kunye nokuhamba kakuhle.

● I-blade yokucheba kunye nomlindi wangasemva ufakwe ukuphumeza ukulungelelaniswa nokusebenza okungcono.Izibane ezikhethiweyo ze-LED ezisebenzayo ziphucula amandla okukhanyisa ngexesha lomsebenzi wasebusuku ukufezekisa ukhuseleko oluphezulu lokusebenza kunye nokuthembeka.
Ulondolozo olulula

● Amalungu olwakhiwo azuze umgangatho obalaseleyo weemveliso ezivuthiweyo zikaShantui;

● Iintambo zombane zithatha imibhobho ekhuselweyo yokukhusela kunye ne-deconcentrators ye-branching, ebonisa umgangatho wokukhusela ophezulu.

● Iihoods ezivulelekayo ezinesithuba esikhulu zenza ukuba ukulungiswa nokugcinwa kube lula.

● Zonke iindawo zokuthambisa kunye nokugcinwa komatshini zijoliswe kwicala langaphandle lomzimba womatshini ukufezekisa ukugcinwa okulula kunye nokukhawuleza.

Igama lepharamitha	STR23 (Ukucheba ibulldozer, uguqulelo lweore)
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg)	25540
Uxinzelelo oluphantsi (kPa)	69
Injini
Imodeli yenjini	QSNT
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm)	179/2000
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm)	5535
Ukuqhuba ukusebenza
Isantya sokuya phambili (km/h)	F1:0-3.8 F2:0-6.8 F3:0-13.8
Ukubuyisela umva isantya (km/h)	R1:0-4.9 R2:0-8.5 R3:0-14.3
Inkqubo yeChassis
Umgama osembindini wengoma (mm)	2000
Ububanzi bezihlangu zomzila (mm)	560
Ubude bomhlaba (mm)	2840
Umthamo wetanki
Itanki yamafutha (L)	485
Isixhobo esisebenzayo
Uhlobo lweblade	I-blade yokucheba
Ubunzulu bokwemba (mm)	740
Uhlobo lweRipper	-
Ubunzulu bokukrazula (mm)	-

BULLDOZER DH10-C2

DH10-C2

AMANDLA ENTJINI:

With 86kW/2200rpm, this engine conforms to China-III/EU Stage IIIA emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

9680kg/10140kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ukubuza Kaninzi
IBULLDOZER SD22

SD22

AMANDLA ENTJINI:

Nge-175kW/1800rpm, le njini ihambelana nomthetho we-China-III wokukhutshwa. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

23450kg (Eqhelekileyo) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Imodeli yenjini:

WP12/QSNT-C235

Ukubuza Kaninzi
BULLDOZER SD32

SD32

AMANDLA ENTJINI:

With 257kW/2000rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

40200kg (Standard) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ukubuza Kaninzi
IBULLDOZER DH46-C3

I-DH46-C3

AMANDLA ENTJINI:

380kW/1800rpm eTshayina-Ⅲ iyahambelana I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

56000 kg (Eqhelekileyo) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ukubuza Kaninzi
IBULLDOZER SD60-C5

SD60-C5

AMANDLA ENTJINI:

Nge-450kW/1800rpm, le njini ihambelana ne-Euro-III A emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

70630kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ukubuza Kaninzi
IBULLDOZER YOKUNCINISA STR13

I-STR13

AMANDLA ENTJINI:

Nge-105kW/1900rpm, le njini ihambelana nomthetho we-China-III wokukhutshwa. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ubunzima BONKE:

14500kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO

Ukubuza Kaninzi