BULLDOZER

DH10-C2

IKE INJI

N'iji 86kW/2200rpm, injin a na-agbaso ụkpụrụ China-III/EU Stage IIIA.

Ibu n'ozuzu

9680kg/10140kg

Nweta ntinye okwu

DH10-C2

Njirimara
parameters
ikpe
ndụmọdụ

Sistemụ Ike
Usoro njikwa
Gburugburu ịnya ụgbọ ala / ịnya ụgbọ ala
Ngbanwe na-arụ ọrụ
Ịrụ ọrụ
Nlekọta dị mfe

Sistemụ Ike

• Igwe njikwa eletrọnịkị Cummins arụnyere kwekọrọ na China-III/EU StageⅢA ụkpụrụ ikuku na-egosipụta ike siri ike na nchekwa ike dị elu na enyi gburugburu ebe obibi.Sistemụ mmanụ ọkụ nwere nzacha ọkwa atọ na-ekwe nkwa ngbanwe dị mma na mmanụ dizel dị ala na ahịa ndịda Ebe Ọwụwa Anyanwụ Eshia.

• Shantui si hydrostatic mbanye njikarịcha teknụzụ na-etinyere iji nweta kacha arụ ọrụ arụmọrụ na kasị ezi uche mmanụ ụgbọala aku na uba:
Usoro njikwa

• Ihe owuwu abụọ-modul (Ọrụ na nchekwa) njikwa ihe owuwu na-enyocha ibe ya iji nweta nchekwa dị elu na ntụkwasị obi.

• A na-enye ọrụ nyocha onwe onye na-adịghị arụ ọrụ iji gosi n'ụzọ ziri ezi ihe kpatara adịghị arụ ọrụ na nghazi ma belata oge nkwụsị.

• Akụrụngwa ọrụ nwere usoro ịnweta ohere dị iche na-egosipụta ịdị mfe na ịdị mfe yana mmụta na nghọta dị mfe.
Gburugburu ịnya ụgbọ ala / ịnya ụgbọ ala

• Ụgbọ mmiri na-ejikọta ya na usoro 8-point-absorbing na-eme ka mkpọtụ na mkpọtụ dị ala, nnukwu ohere, na ọhụụ dị mma.

• Ọnụ ụzọ na windo sara mbara na-enye onye ọrụ aka ilele akụkụ niile nke agụba ahụ nke ọma yana ROPS agbakwunyere na-abawanye n'akụkụ igwe ahụ.

• Pedal onye na-eme ngwa ngwa kwụsịtụrụ nwere obere olu, nnukwu oghere ụkwụ, na nkasi obi dị elu nke ọrụ.

• The mechanically cushioned oche na-enye nnukwu mgbanwe nso ma longitudinal direction na backrest ọnọdụ.Ogwe aka na-egosipụta mmetụta ọdịdị dị mma na mpaghara buru ibu.Ọdụdọ ergonomic na-enye ahụmịhe ọrụ kachasị dị mma maka onye ọkwọ ụgbọ ala.
Ngbanwe na-arụ ọrụ

• The igwe adopts abụọ-circuit electronically achịkwa hydrostatic mbanye usoro iji hụ na ezi ibu onwe-adaptability, loaded na na-site steering ike, stepless ọsọ ụkpụrụ, na elu mgbanwe na arụmọrụ na-aghọta pụtara ìhè ewu arụmọrụ na warara saịtị.

• Usoro chassis nwere ogologo ala dị ogologo, nkwụsị ala dị elu, ịnya ụgbọ ala kwụsiri ike, yana ọmarịcha okporo ụzọ.Ọkọlọtọ traction frame na nhọrọ atọ-shank ripper na-ekwe nkwa ịrụ ọrụ dị elu.Ọkọlọtọ LED na-arụ ọrụ oriọna nke ọkụ ọkụ dị elu na-eme ka ike ọkụ dị n'oge arụ ọrụ abalị iji nweta nchekwa na ntụkwasị obi dị elu.
Ịrụ ọrụ

• A na-arụ njem ahụ site na otu joystick njikwa eletrọnịkị na-arụ ọrụ na ngwaọrụ na-arụ ọrụ site na otu onye na-anya ụgbọelu na-arụ ọrụ, na-egosipụta mgbanwe, aka, na arụ ọrụ dị mma.
Nlekọta dị mfe

• The bughi akụkụ eketa magburu onwe àgwà nke Shantui tozuru okè ngwaahịa.

• Akụrụ ọkụ eletrik na-anakwere ọkpọkọ corrugated na-enweghị nkebi na ihe ndị na-emepụta ihe maka alaka, na-egosipụta ọkwa nchebe dị elu.

• Akụkụ eletrik na hydraulic bụ isi na-anakwere ngwaahịa ndị a na-ebubata, na-egosipụta àgwà kwụsiri ike na ntụkwasị obi na ntụkwasị obi dị oke elu.

• Nhazi modul nke igwe na-eme ka ọ dị mfe ịkwasa na ikpokọta, nrụzi dị mfe, obere ọdịda ọdịda, na nhazi dị mfe.

Aha oke	DH10-C2 XL (ụdị agbatịgoro)	DH10-C2 LGP(ụdị Super-wetland)
Paragraf arụmọrụ
Ibu ọrụ (Kg)	9680kg/21341lb (Ya na etiti traction)	10140kg/22355lb (Ya na etiti traction)
Nrụgide ala (kPa)	44.4	34
Injin
Ụdị njin	QSF3.8	QSF3.8
Enyere ike/ọsọ ọsọ (kW/rpm)	86/2200	86/2200
N'ozuzu akụkụ
N'ozuzu akụkụ nke igwe (mm)	444228602885	444232002885
Ịkwọ ụgbọ ala
Ọsọ n'iru (km/h)	0~9km/h(5.6mph)	0~9km/h(5.6mph)
Ntụgharị ọsọ (km/h)	0~9km/h(5.6mph)	0~9km/h(5.6mph)
Sistemụ chassis
Ogologo egwu etiti (mm)	1650	1790
Obosara akpụkpọ ụkwụ egwu (mm)	460	630
Ogologo ala (mm)	2320	2320
Ike tankị
Mmanụ tankị (L)	197	197
Ngwaọrụ na-arụ ọrụ
Ụdị agụba	PAT	PAT
Omimi igwu ala (mm)	450	450
Ụdị Ripper	Ripper eze atọ	Ripper eze atọ
Omimi ndọwa (mm)	340	340

BULLDOZER SD17-B3

SD17-B3

IKE INJI:

140kW/1900rpm China-II compliant 140KW/1900RPM CHINA-II COMPLIAN

Ibu n'ozuzu:

17000kg 140KW/1900RPM CHINA-II COMPLIAN

Ụdị injin:

WD10

Ajuju Ọzọ
BULLDOZER DH16-K2

DH16-K2

IKE INJI:

142kW/2100rpm , US EPA Tier 4 final/EU Stage Ⅳ emission regulation. 140KW/1900RPM CHINA-II COMPLIAN

Ibu n'ozuzu:

17635kg/18800kg 140KW/1900RPM CHINA-II COMPLIAN

Ụdị injin:

N67

Ajuju Ọzọ
BULLDOZER SD20-C6

SD20-C6

IKE INJI:

N'iji 162kW/1950rpm, injin a na-agbaso ụkpụrụ ikuku nke China-III. 140KW/1900RPM CHINA-II COMPLIAN

Ibu n'ozuzu:

21,000kg (gụnyere ripper) 140KW/1900RPM CHINA-II COMPLIAN

Ụdị injin:

WP12

Ajuju Ọzọ
TRIMMING BULLDOZER STR13

STR13

IKE INJI:

With 105kW/1900rpm, this engine conforms to China-III emission regulation. 140KW/1900RPM CHINA-II COMPLIAN

Ibu n'ozuzu:

14500kg 140KW/1900RPM CHINA-II COMPLIAN

Ajuju Ọzọ
BULLDOZER SD16

SD16

IKE INJI:

131kW/1850rpm 140KW/1900RPM CHINA-II COMPLIAN

Ibu n'ozuzu:

17,000kg (Standard) 140KW/1900RPM CHINA-II COMPLIAN

Ụdị injin:

WD10/WP10

Ajuju Ọzọ
TRIMMING BULLDOZER STR23

STR23

IKE INJI:

With 180kW/2000rpm, this engine conforms to China-III emission regulation. 140KW/1900RPM CHINA-II COMPLIAN

Ibu n'ozuzu:

25540kg 140KW/1900RPM CHINA-II COMPLIAN

Ajuju Ọzọ