Akwai littafin jagora don saukewa a kowane lokaci
Da fatan za a bar bayanin ku a ƙasa don ƙarin bayanin samfur
Na karanta a hankali kuma na yarda da abin da aka makalaYarjejeniyar Keɓantawa

BULLDOZER

Saukewa: DH10-C2
WUTAR INJI
Tare da 86kW/2200rpm, wannan injin ya dace da ka'idojin fitar da hayaki na China-III/EU Stage IIIA.
NAUYI GABA DAYA
9680kg/10140kg
Saukewa: DH10-C2
  • Halaye
  • sigogi
  • lokuta
  • shawarwari
hali
  • Tsarin Wuta
  • Tsarin sarrafawa
  • Muhallin Tuki/Hawa
  • Daidaitawar aiki
  • Ayyukan aiki
  • Sauƙaƙan kulawa
  • Tsarin Wuta

    • Injin sarrafa lantarki na Cummins da aka shigar ya dace da China-III/EU StageⅢKa'idojin fitar da hayaki da fasalulluka mai ƙarfi da ƙarfin ceton makamashi da abokantaka na muhalli.Tsarin man fetur tare da tace mai matakai uku yana ba da tabbacin dacewa mai kyau ga ƙarancin dizal a kasuwannin kudu maso gabashin Asiya.

    • Ana amfani da fasaha na inganta haɓakar motar ruwa ta Shantui don cimma matsakaicin ingantaccen aiki da tattalin arzikin mai:

  • Tsarin sarrafawa

    • Tsarin gine-ginen mai sarrafa nau'i biyu (Aiki da aminci) yana tabbatar da juna don cimma babban aminci da aminci.

    • An ba da aikin tantance kai na rashin aiki don nuna daidai dalilin rashin aiki da daidaitawa da kuma rage lokacin raguwa.

    • Software na sabis tare da matsayi daban-daban na samun dama yana da sauƙin sauƙi da aiki da sauƙin koyo da fahimta.

  • Muhallin Tuki/Hawa

    • Taksi mai haɗin gwiwa tare da 8-point-absorbing inji yana da ƙananan amo da rawar jiki, babban sarari, da kyakkyawan hangen nesa.

    • Faɗin ƙofofi da tagogi suna ba mai aiki damar duba kowane kusurwoyi na ruwan wukake kuma haɗaɗɗen ROPS yana ƙara ma'aunin hangen nesa na injin.

    • Fedal ɗin ƙara mai sauri guda ɗaya da aka dakatar yana da ƙaramin ƙara, babban filin ƙafa, da babban jin daɗin aiki.

    Wurin zama mai matattarar injina yana ba da babban kewayon daidaitawa a cikin shugabanci mai tsayi da matsayi na baya.Hannun hannu yana nuna jin daɗin rubutu mai daɗi da babban yanki.The ergonomic joysticks suna ba da mafi kyawun ƙwarewar aiki don direba.

  • Daidaitawar aiki

    • Injin rungumi dabi'ar biyu-kewaye lantarki sarrafa hydrostatic drive tsarin don tabbatar da mai kyau load kai-adaptability, ɗora Kwatancen da kuma a-wuri tuƙi damar, stepless gudun tsari, da high sassauci da kuma yadda ya dace da kuma gane fice yi yi a kunkuntar shafukan.

    • Tsarin chassis yana fasalta tsayin ƙasa mai tsayi, ƙyalli mai tsayi, tsayayyen tuƙi, da ingantaccen zirga-zirga.Madaidaicin firam ɗin juzu'i da zaɓin ripper-shank uku suna garantin babban ƙarfin aiki.Madaidaicin fitilu masu aiki na LED na ƙarfin haske mafi girma yana haɓaka ƙarfin haske yayin ayyukan dare don cimma babban aminci da aminci.

  • Ayyukan aiki

    • Ana tafiyar da balaguron ne ta hanyar joystick mai sarrafa lantarki guda ɗaya kuma na'urar aiki ana sarrafa ta ta hanyar joystick matukin jirgi ɗaya, yana nuna sassauƙa, aiki, da ayyuka masu daɗi.

  • Sauƙaƙan kulawa

    • The tsarin sassa gaji m ingancin Shantui ta balagagge kayayyakin.

    • Makarantun lantarki suna ɗaukar bututun ƙwanƙwasa maras sumul da na'urori masu ɗorewa don reshe, waɗanda ke nuna babban matakin kariya.

    • Babban sassan lantarki da na'ura mai aiki da karfin ruwa sun karɓi samfuran da aka shigo da su, waɗanda ke nuna ingantaccen inganci da ingantaccen abin dogaro.

    • Tsarin tsarin tsarin na'ura na na'ura yana da sauƙin sassauƙawa da haɗuwa, gyare-gyare mai sauƙi, ƙananan gazawar, da kuma kulawa mai sauƙi.

siga
Sunan siga DH10-C2 XL (Extended sigar) DH10-C2 LGP(Super-wetland sigar)
Siffofin ayyuka
Nauyin aiki (Kg) 9680kg/21341lb (Tare da firam ɗin gogayya) 10140kg/22355lb (Tare da firam ɗin gogayya)
Matsin ƙasa (kPa) 44.4 34
Injin
Samfurin injin QSF3.8 QSF3.8
Ƙarfin da aka ƙididdigewa (kW/rpm) 86/2200 86/2200
Gabaɗaya girma
Gabaɗaya girman injin (mm) 4442*2860*2885 4442*3200*2885
Ayyukan tuƙi
Gudun gaba (km/h) 0 ~ 9km/h(5.6mph) 0 ~ 9km/h(5.6mph)
Juyawa gudun (km/h) 0 ~ 9km/h(5.6mph) 0 ~ 9km/h(5.6mph)
Tsarin Chassis
Tsawon tsakiyar waƙa (mm) 1650 1790
Nisa na takalman waƙa (mm) 460 630
Tsawon ƙasa (mm) 2320 2320
karfin tanki
Tankin mai (L) 197 197
Na'urar aiki
Nau'in ruwa PAT PAT
Zurfin tono (mm) 450 450
Nau'in Ripper Ripper mai hakora uku Ripper mai hakora uku
Zurfin tsagewa (mm) 340 340
bayar da shawarar
  • BULLDOZER SD17-B3
    SD17-B3
    WUTA INJI:
    140kW/1900rpm China-II compliant 140KW/1900RPM CHINA-II COMPLIAN
    NAUYIN GABA ɗaya:
    17000kg 140KW/1900RPM CHINA-II COMPLIAN
    Samfurin injin:
    WD10
  • BULLDOZER DH16-K2
    DH16-K2
    WUTA INJI:
    142kW/2100rpm , US EPA Tier 4 final/EU Stage Ⅳ emission regulation. 140KW/1900RPM CHINA-II COMPLIAN
    NAUYIN GABA ɗaya:
    17635kg/18800kg 140KW/1900RPM CHINA-II COMPLIAN
    Samfurin injin:
    N67
  • BULLDOZER SD20-C6
    Saukewa: SD20-C6
    WUTA INJI:
    Tare da 162kW/1950rpm, wannan injin ya dace da ka'idojin fitar da iska na China-III. 140KW/1900RPM CHINA-II COMPLIAN
    NAUYIN GABA ɗaya:
    21,000kg (ciki har da ripper) 140KW/1900RPM CHINA-II COMPLIAN
    Samfurin injin:
    WP12
  • TRIMMING BULLDOZER STR13
    STR13
    WUTA INJI:
    With 105kW/1900rpm, this engine conforms to China-III emission regulation. 140KW/1900RPM CHINA-II COMPLIAN
    NAUYIN GABA ɗaya:
    14500kg 140KW/1900RPM CHINA-II COMPLIAN
  • BULLDOZER SD16
    SD16
    WUTA INJI:
    131kW/1850rpm 140KW/1900RPM CHINA-II COMPLIAN
    NAUYIN GABA ɗaya:
    17,000kg (Standard) 140KW/1900RPM CHINA-II COMPLIAN
    Samfurin injin:
    WD10/WP10
  • TRIMMING BULLDOZER STR23
    STR23
    WUTA INJI:
    With 180kW/2000rpm, this engine conforms to China-III emission regulation. 140KW/1900RPM CHINA-II COMPLIAN
    NAUYIN GABA ɗaya:
    25540kg 140KW/1900RPM CHINA-II COMPLIAN
KAYAN KYAUTA DA ƙwararrun Taimako A KOWACE JUYA