English
UMSHINI WOKUSILA ENDLELA SMT100M-C6
  • SMT100M-C6
Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

UMTSHINI WOKUSILA ENDLELA

SMT100M-C6
AMANDLA ENTJINI
Nge-160kW/2200rpm, le njini ihambelana nommiselo we-China-III wokukhutshwa.
Ubunzima BONKE
14500kg
UKUGULA UBUNZI
1000mm
Fumana isicatshulwa
SMT100M-C6
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Inkqubo yokuqhuba
  • Indibano yerotor yokugaya
  • Inkqubo yokuhamba
  • Ulondolozo olulula
  • Ubukrelekrele obuphezulu
  • Inkqubo yokuqhuba

    ● Injini ye-SDEC elawulwa ngombane ihambelana nommiselo we-China-III wokukhupha oomatshini abangengawo bendlela, ebonisa ubukrelekrele obuphezulu kunye nokusebenza kakuhle, iindawo eziphezulu kwindalo yonke, kunye neendleko eziphantsi zolondolozo.

    ● Ubugcisa bokugcina umbane, kuqukwa nokuzenzela injini, kusetyenziselwa ukufezekisa uqoqosho olungcono lwamafutha, umthamo okhutshwayo ophantsi, kunye nokusebenza ngokufanelekileyo kwawo wonke umatshini.

    ● Igubu lokusila liqhutywa libhanti lomatshini kwaye ibhanti lokuqhuba licinezelekile ngokwasemanzini, libonisa ukusebenza kakuhle kokuqhuba, impembelelo yokusebenza ethotyiweyo, kunye nokuhanjiswa kwamandla okuzinzile nokuthembekileyo.

  • Indibano yerotor yokugaya

    ● Iipleyiti ezisecaleni kumacala amabini zinyuswa ngokusetyenziswa kwamanzi.

    ● Imigqomo ekhethwayo yoqoqosho neyokugqibezela ibonelela ukuhlangabezana neemfuno ezahlukeneyo zokusebenza.

    ● Ukunqongophala kwamanzi kunye nemisebenzi yesilumkiso sebhloko yesixokelelwano samanzi iqinisekisa ngokufanelekileyo ukupholisa kunye nokucutha uthuli kunye nokwandisa ubomi bomsiki wokusila.

  • Inkqubo yokuhamba

    ● Inkqubo yokuhamba ithatha i-full-hydraulic four-wheel drive ukufezekisa ukuhleleleka okunamandla kunye nokuqhuba ukuya kunye nokusuka kwisithuthi sothutho se-flat-bed ngokuziqhubela ngokukhuselekileyo.

    ● Uxinzelelo olusebenzayo lwenkqubo yokuhamba yi>375bar, ebonisa amandla okutsala okunamandla.

    ● Inkqubo yokuhamba ibandakanya umsebenzi wokusasazwa ngokunyanzeliswa ukukhusela ngokufanelekileyo ukutyibilika.

    ● Isantya sokuhamba sifikelela kwi-8km/h.

    ● Ikholamu yangasemva yasekunene iyakwazi ukujikeleza nge-180º kwimisebenzi yokuthintela.

  • Ulondolozo olulula

    ● Amalungu olwakhiwo azuze umgangatho obalaseleyo weemveliso ezivuthiweyo zikaShantui.

    ● Uyilo olukhulu lokuvula ihood ye-injini kunye neengcango ezisecaleni zibonelela ngegumbi eliphangaleleyo lolondolozo.

    ● Awona malungu angundoqo ombane kunye ne-hydraulic amkela iimveliso ezivela kumazwe angaphandle, ezinomgangatho ozinzile nothembekileyo kunye nokuthembeka okuphezulu kakhulu.

    ● Isihluzo sangaphandle se-fuel/i-oyile kunye nemilomo yegrisi zifakelwe ngendlela ejingayo ukwenza lula ugcino nokutshintshwa.

  • Ubukrelekrele obuphezulu

    ● Imowudi yokulawula inethiwekhi yedijithali ye-CAN isetyenziselwa ukuqinisekisa ngokufanelekileyo ulawulo oluzenzekelayo kunye nokukhuselwa kwazo zonke iintshukumo zomatshini.

    ● I-interfaces efakiweyo yomatshini womntu ingabonisa phakathi iiparamitha zokusebenza zedijithali zomatshini.

    ● Ukungasebenzi kakuhle kolwazi lokuzixilonga kunye nesilumkiso kunye nolwazi olukhawulezileyo luqonda ukuba umatshini ukhuselekile kwaye usebenza ngokufanelekileyo.

    ● Kusetyenziswa itekhnoloji ephucukileyo yolawulo lwe-electro-hydraulic proportional control system kunye ne-automatic leveling system inokufakelwa ukuqonda ulawulo oluchanekileyo lobunzulu bokungqusha kunye nokusebenza ngokucacileyo okunenzuzo yokusila.

ipharamitha
Igama lepharamitha SMT100M-C6
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg) 15200
Ubunzima bothutho(Kg) 14500
Obona bubanzi bokusila (mm) 1000
Obona bunzulu bokusila (mm) 300
Injini
Imodeli yenjini I-SC9D
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm) 160/2200
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm) 12210*2385*2545
Ukuqhuba ukusebenza
Isantya sokuhamba (km/h) 0-8
Isantya sokusebenza (m/min) 0-30
Inkqubo yoMhambisi
Ububanzi bebhanti lokuhambisa (mm) 500
I-engile ejingi yesidluliseli (Ekunene/ekhohlo) (°) 25/20
Umthamo wetanki
Itanki yamafutha (L) 540
Isixhobo esisebenzayo
Inani labasiki bokungqusha (Iqhekeza) 94
AMATYALA
cebisa
  • BULLDOZER SD26
    SD26
    BULLDOZER SD26
    AMANDLA ENTJINI:
    206kW/1800rpm I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    23400 kg（Standard） I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Engine model：
    WP12
    Ukubuza Kaninzi
  • STANDARD MOTOR GRADER SG16-3
    SG16-3
    STANDARD MOTOR GRADER SG16-3
    AMANDLA ENTJINI:
    With118kW/2200,this engine conforms to China-II non-road machinery emission regulation
    Ubunzima BONKE:
    15100kg
    WIDTH OF SHOVEL BLADE：
    3660mm
    Ukubuza Kaninzi
  • REMOTE CONTROL DOUBLE DRUM SRD900W
    SRD900W
    REMOTE CONTROL DOUBLE DRUM SRD900W
    Ubunzima BONKE:
    870kg
    AMANDLA ENTJINI:
    With 6kW/3600rpm, this engine conforms to China-Ⅲ emission regulation
    UKUHLANGANISA UBUNZI:
    680mm
    Ukubuza Kaninzi
  • BULLDOZER SD16
    SD16
    BULLDOZER SD16
    AMANDLA ENTJINI:
    131kW/1850rpm I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17,000kg (Standard) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Engine model：
    WD10/WP10
    Ukubuza Kaninzi
  • STANDARD LOADER SL50WN
    SL50WN
    STANDARD LOADER SL50WN
    OPERATING WEIGHT：
    17100kg
    UBUCHULE BEBHEKE:
    3m³
    AMANDLA ENTJINI:
    162kW/2000rpm
    Ukubuza Kaninzi
  • BULLDOZER SD90-C5
    SD90-C5
    BULLDOZER SD90-C5
    AMANDLA ENTJINI:
    With 708kW/2100rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    106260kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ukubuza Kaninzi
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO
Cofa u-enter ukukhangela okanye i-ESC ukuvala