| Product | SP70Y |
| Performance parameters | |
| Huremu hwekushanda (Kg) | 47500 |
| Hukuru hwekusimudza simba (T) | 70 |
| Yakayerwa simba reinjini (kw/hp) | 257 |
| Diminimum turning radius (mm) | 3950 |
| Ground pressure (Mpa) | 0.086 |
| Injini | |
| Injini muenzaniso | NTA855-C360S10 |
| Nhamba yemasilinda × silinda dhayamita× sitiroko (mm×mm) | 6-139.7×152.4 |
| Yakayerwa simba/yakayerwa kumhanya (kw/rpm) | 257/2000 |
| Maximum torque (Nm/r/min) | 1509/1400 |
| Zviyero zvakazara zvemuchina | |
| Urefu (mm) | 5560 |
| Upamhi (mm) | 3940 |
| Urefu (mm) | 3395 |
| Kutyaira kuita | |
| Pamberi giya 1/Reverse giya 1 (km/h) | 0-3.7/0-4.5 |
| Pamberi giya 2/Reverse giya 2 (km/h) | 0-6.8/0-8.2 |
| Pamberi giya 3/Reverse giya 3 (km/h) | 0-11.5/0-13.5 |
| Traveling system | |
| Hydraulic torque inoshandura | Zvinhu zvitatu-chikamu chimwe-chikamu uye chikamu chimwe chete |
| Transmission | Planetary giya, multi-plate clutch, uye hydraulic + yekumanikidza lubrication mhando |
| Main drive | Spiral bevel giya, imwe-nhanho deceleration uye splash lubrication |
| Steering clutch | Rudzi rwemvura, yakawanda-ndiro chitubu chakaiswa, hydraulically yakaburitswa, uye nemaoko-hydraulically inoshanda |
| Mabhureki ekufambisa | Rudzi rwakanyorova, rudzi rwebhandi rinoyangarara, uye hydraulically rubatsiro |
| Final drive | Matanho maviri-yakatwasuka giya rekudzora uye splash lubrication |
| Chassis System | |
| Suspension mode | Rigid crossbeam chimiro |
| Chinhambwe chepakati chenjanji (mm) | 2380 |
| Kufara kweshangu dze track (mm) | 760 |
| Kureba kwepasi (mm) | 3620 |
| Nhamba yeshangu dze track (Rimwe divi / chidimbu) | 45 |
| Chain track pitch(mm) | 228 |
| Nhamba yevanotakura rollers (Rimwe divi) | 2 |
| Nhamba yetrack rollers (Rimwe divi) | 9 |
| Kushanda hydraulic system | |
| Pombi inoshanda | Yakagadziriswa giya pombi, ine yakanyanya kusimuka pa201.5ml/r |
| Pilot pombi | Yakagadziriswa giya pombi, ine yakanyanya kusimuka pa10ml/r |
| Ivhavha yekushanda | Proportion multi-way valve |
| Counterweight humburumbira bore(mm) | φ125 |
| Tangi kugona | |
| Tangi remafuta (L) | 550 |
| Kushanda hydraulic mafuta tank (L) | 400 |
| Kushanda mudziyo | |
| Hurefu hwepamusoro hwekusimudza(mm) | 6550 |
| Hoko inosimudza kumhanya m/min | 0～6.5 |
| Kureba kweboom (m) | 7.3 (Sarudzo 9.0) |
