Product manual available for download at any time
Please leave your information below for more product information
I read carefully and accept the attached Privacy Agreement

EXCAVATOR

SE150
OVERALL WEIGHT
13500kg
BUCKET CAPACITY
0.4~0.65(0.55)m
ENGINE POWER
With 86kW/2200rpm , this engine conforms to China-III emission regulation.
SE150
  • Characteristics
  • parameters
  • cases
  • recommendations
characteristic
  • High-end system configuration
  • Enhanced working device
  • Drive sprockets, idlers, track rollers, carrier rollers, and tracks
  • Intelligent electronic control and optimal power control
  • Spacious and comfortable operating environment
  • Quick and convenient maintenances
  • Optional equipment of machine
  • Optional attachments
  • High-end system configuration

    ● Cummins high pressure common rail electronic injection engine features high power reserve and strong power.

    ● The full set of Kawasaki negative-flow system features high stability and reliability and is the golden configuration among the products of same tonnage.

    ● This machine features high system pressure, high flow, and fast motion response, with maximum digging force up to 105KN.

    ● The comprehensively optimized working device and the cast shaft seats for boom and arm feature high strength, good wear resistance, and long life.

    ● The two-sided support track rollers in place of carrier rollers, two one-sided track guides, and the reinforced X-frame are installed to adapt to severe working conditions.

    ● The optional 0.65m3 rock bucket is designed specially for rock working condition.

     

  • Enhanced working device

    ● The structures of critical portions are comprehensively optimized and the load-carrying positions are reinforced to resist against severe working conditions.

    ● The baseplates, side plates, and reinforcement plates of bucket are made of high-strength wear-resistant material to improve the durability of bucket.

    ● Based on the digging path of the bucket, the bucket structure is optimized to reduce the digging resistance and improve the digging efficiency.

    ● The H-shaped track frame features strong carrying capacity and reasonable machine load distribution. The track frame is equipped with standard boarding footplate to mitigate the user’s labor strength and improve the user satisfaction.

  • Drive sprockets, idlers, track rollers, carrier rollers, and tracks

    ● Decades of R&D and manufacturing experiences of drive sprockets, idlers, track rollers, carrier rollers, and tracks and world’s leading technologies.

    ● The world’s sophisticated forging and heat treatment processes guarantee stable and reliable quality.

     

  • Intelligent electronic control and optimal power control

    ● The intelligent control system realizes the optimal match between power system and hydraulic system to improve the working efficiency. The automatic idling function is provided to lower the fuel consumption and reduce the operating cost.

    ● The man-machine friendly new generation intelligent electronic control system enables you to master all working status of your machine.

    ● Four preset working modes of P (Heavy-Load), E (Economic), A (Automatic), and B (Breaking Hammer) feature easy switchover.

     

  • Spacious and comfortable operating environment

    ● The colors of the all-injection-molded interior trim parts are effectively matched as per ergonomics to mitigate the operator’s visual fatigue.

    ● The control devices are reasonably arranged to realize large space, broad vision, and convenient and comfortable operations.

    ● The high-power A/C is installed and the adjustable wrist rest and the air cushioned seat are provided to help your all-day comfortable operations.

     

  • Quick and convenient maintenances

    ● The fully openable engine hood is installed with locating mechanism to realize handy and safe opening, large engine compartment space, and easy maintenances.

    ● The electric parts are centrally arranged to ease the checking and maintenances.

    ● The filling of washing fluid, the replacement of air filter element, and the power master switch are easily accessible.

  • Optional equipment of machine

    Refueling pump

    Cab warning lamp

    Cab ceiling lamp

    Cab overhead protective net

    Cab front upper protective net

    Cab front lower protective net

    Rubber track

    Narrow bucket

  • Optional attachments

    Breaking hammer, ripper, timber grab, stone grab, quick change coupling, hydraulic tamper, quick change coupling, and breaking hammer pipeline.

parameter
Comparative item SE150 (Standard version)
Overall dimensions
Overall length (mm) 7860
Ground length (During transport) (mm) 4390
Overall height (To the top of boom) (mm) 2860
Overall width (mm) 2645
Overall height (To top of cab) (mm) 2855
Ground clearance of counterweight (mm) 915
Minimum ground clearance (mm) 425
Tail turning radius (mm) 2380
Track length (mm) 3645
Track gauge (mm) 2000
Track width (mm) 2500
Standard track shoe width (mm) 500
Turntable width (mm) 2645
Distance from slewing center to tail (mm) 2375
Working range
Maximum digging height (mm) 8670
Maximum dumping height (mm) 6210
Maximum digging depth (mm) 5490
Maximum vertical digging depth (mm) 4625
Maximum digging distance (mm) 8325
Maximum digging distance at ground level (mm) 8195
Working device minimum turning radius (mm) 2395
Maximum lifting height of bulldozer blade (mm) -
Maximum digging depth of bulldozer blade (mm) -
Engine
Model QSF3.8T (China-III)
Type  4-cylinder, high pressure common rail, and water-cooled and turbocharged
Displacement (L) 3.76
Rated power (kW/rpm) 86/2200
Hydraulic system
Type of hydraulic pump Variable displacement duplex plunger pump
Rated working flow (L/min) 2×130
Bucket
Bucket capacity (m³) 0.65
Swing system
Maximum swing speed (r/min) 11.3
Brake type Mechanically applied and pressure released
Digging force
Bucket arm digging force (KN) 70
Bucket digging force (KN) 97
Operating weight and ground pressure
Operating weight (kg) 14500
Ground pressure (kPa) 43.8
Traveling system
Traveling motor Axial variable displacement plunger motor
Traveling speed (km/h) 3.25/5.2
Traction force (KN) 118
Gradeability 70%(35°)
Tank capacity
Fuel tank capacity (L) 220
Cooling system (L) 20
Engine oil capacity (L) 12
Hydraulic oil tank/system capacity (L) 177/205
recommend
  • EXCAVATOR SE220
    SE220
    OVERALL WEIGHT:
    21900kg
    BUCKET CAPACITY:
    1.05m³
    ENGINE POWER:
    With 124kW/2050rpm, this engine conforms to China-Ⅱ emission regulation.
  • EXCAVATOR SE550LCW
    SE550LCW
    OPERATING WEIGHT:
    53500kg
    BUCKET CAPACITY:
    3.2m³
    ENGINE POWER:
    With 316kW/1900rpm , this engine conforms to China-III emission regulation.
  • SE25SR
    SE25
    Engine power: (Metric):
    With 14.6KW/2400rpm, this engine conforms to Euro V/EPA Tier 4F emission regulation.
    Overall weight (Metric):
    2680kg
    Bucket capacity:
    0.06m³
  • EXCAVATOR SE135
    SE135
    OVERALL WEIGHT:
    13500kg
    BUCKET CAPACITY:
    0.4~0.65(0.55)m
    ENGINE POWER:
    With 86kW/2200rpm , this engine conforms to China-III emission regulation.
  • EXCAVATOR SE305LCW
    SE305LCW
    OVERALL WEIGHT:
    31500kg
    BUCKET CAPACITY:
    1.5m³
    ENGINE POWER:
    With 199kW/2000rpm, this engine conforms to China-III emission regulation.
  • EXCAVATOR SE220LC
    SE220LC
    OVERALL WEIGHT:
    22800kg
    BUCKET CAPACITY:
    1.05m3
    ENGINE POWER:
    With 112kW/1950rpm, this engine conforms to China-II emission regulation.